Properties of Solids & Liquids (NEET (NTA)-National Eligibility cum Entrance Test (Medical) Physics): Questions 160 - 164 of 190
Get 1 year subscription: Access detailed explanations (illustrated with images and videos) to 2142 questions. Access all new questions we will add tracking exam-pattern and syllabus changes. View Sample Explanation or View Features.
Rs. 550.00 or
Question number: 160
» Properties of Solids & Liquids » Specific Heat Capacity
Question
A beaker contains 400 gm of water. The heat capacity the beaker is equal to that of 20 gm of water. The initial temperature of water in the beaker is 20°C. If 240 gm hot water at 92°C is poured in it, the final temperature (neglecting radiation loss) will be nearest to
Choices
Choice (4) | Response | |
---|---|---|
a. | 12.58°C |
|
b. | 46.18°C |
|
c. | 6.348°C |
|
d. | 73.4°C |
|
Question number: 161
» Properties of Solids & Liquids » Surface Energy and Surface Tension
Question
Radius of a capillary tube is 4 × 10 -3 m. A liquid of weight 5.20 × 10 -4 N may remain in the capillary tube then the surface tension of liquid will be
Choices
Choice (4) | Response | |
---|---|---|
a. | 2.3 × 10 -2 N/m |
|
b. | 20 N/m |
|
c. | 2.0 × 10 -2 N/m |
|
d. | 20 × 10 -3 N/m |
|
Question number: 162
» Properties of Solids & Liquids » Heat Transfer » Convection
Question
When fluids are heated from the bottom, convection currents are produced because
Choices
Choice (4) | Response | |
---|---|---|
a. | Heated fluid becomes less dense than the cold fluid above it |
|
b. | Molecular motion of fluid becomes aligned |
|
c. | Heated fluid becomes more dense than the cold fluid above it |
|
d. | Molecular collisions take place within the fluid |
|
Question number: 163
» Properties of Solids & Liquids » Young's Modulus
Question
For a given material, the Young’s modulus is 2.4 times that of rigidity modulus. Its Poisson’s ratio is
Choices
Choice (4) | Response | |
---|---|---|
a. | 2 |
|
b. | 0.2 |
|
c. | 1.02 |
|
d. | 1.2 |
|
Question number: 164
» Properties of Solids & Liquids » Elastic Behavior
Question
The ratio of radii of two wires of same material is 4: 1. If these wires are stretched by equal forces, then the ratio of stresses produced in them will be
Choices
Choice (4) | Response | |
---|---|---|
a. | 1: 4 |
|
b. | 1: 16 |
|
c. | 2: 1 |
|
d. | 4: 1 |
|