NEET (NTA)National Eligibility cum Entrance Test (Medical) Physics: Questions 1231  1235 of 2184
Access detailed explanations (illustrated with images and videos) to 2184 questions. Access all new questions we will add tracking exampattern and syllabus changes. Subscription can be renewed yearly absolutely FREE! View Sample Explanation or View Features.
Rs. 550.00 or
How to register?
Question number: 1231
» Properties of Solids & Liquids » Thermal Expansion
Question
The apparent coefficient of expansion of a liquid when heated in a copper vessel is C and when heated in a silver vessel is S. If A is the linear coefficient of expansion of copper, then the linear coefficient of expansion of silver
Choices
Choice (4)  Response  

a. 


b. 


c. 


d. 


Question number: 1232
» Properties of Solids & Liquids » Thermal Expansion
Question
An iron tire is to be fitted on to a wooden wheel 1 m in diameter. The diameter of tire is 6mm smaller than that of wheel. The tire should be heated so that its temperature increases by a minimum of (the coefficient of cubical expansion of iron is 3.6 × 10 ^{5} /°C)
Choices
Choice (4)  Response  

a.  334°C 

b.  1000°C 

c.  167°C 

d.  500°C 

Question number: 1233
» Wave Optics » Diffraction Due to a Single Slit Width of Central Maximum
Question
Light of wavelength 6328 Å is incident normally on slit having a width of 0.2 mm. The width of the central maximum measured from minimum to minimum of diffraction pattern on a screen 9.0 meters away will be about –
Choices
Choice (4)  Response  

a.  0.36° 

b.  0.09° 

c.  0.18° 

d.  0.72° 

Question number: 1234
» Properties of Solids & Liquids » Modulus of Rigidity
Question
The compressibility of water is 5 × 10 ^{10} m ^{2} /N. If it is subjected to a pressure of 15 MPa the fractional decrease in volume will be 
Choices
Choice (4)  Response  

a.  1.5 × 10 ^{2} 

b.  7.5 ×10 ^{3} 

c.  3.3 × 10 ^{5} 

d.  5.6 × 10 ^{4} 

Question number: 1235
» Properties of Solids & Liquids » Hooke's Law
Question
A wire of length lm and area of cross section 4 × 10 ^{8} m ^{2 } increases in length by 0.2 cm when a force of 16 N is applied. Value of Y for the material of the wire will be
Choices
Choice (4)  Response  

a.  2 × l0 ^{11} N/mm ^{2} 

b.  2 × l0 ^{6 } N/m ^{2} 

c.  2 × 10 ^{11} kg/m ^{2} 

d.  2 × 10 ^{11 } N/m ^{2} 
