Networks, Signals and Systems [GATE (Graduate Aptitude Test in Engineering) Electronics]: Questions 99 - 105 of 141

Access detailed explanations (illustrated with images and videos) to 1176 questions. Access all new questions- tracking exam pattern and syllabus. View the complete topic-wise distribution of questions. Unlimited Access, Unlimited Time, on Unlimited Devices!

View Sample Explanation or View Features.

Rs. 450.00 -OR-

How to register? Already Subscribed?

Question 99

Networks, Signals and Systems
Nodal and Mesh Analysis

Appeared in Year: 2015

Question

Numeric Answer▾

The voltage across the capacitor (in volts) in the network shown is …

Equivalent Voltage

Question 100

Networks, Signals and Systems
Superposition, Thevenin and Norton's, Maximum Power Transfer

Appeared in Year: 2016

Question

MCQ▾

In the circuit shown below, is a constant voltage source and is a constant current load.

The Circuit Shown below, V_s is a Constant Voltage Source

The value of that maximizes the power absorbed by the constant current load is

Choices

Choice (4)Response

a.

b.

c.

d.

Question 101

Networks, Signals and Systems
Superposition, Thevenin and Norton's, Maximum Power Transfer

Appeared in Year: 2017

Question

Numeric Answer▾

Consider the circuit shown in figure

The Circuit Shown in Figure

The Thevenin equivalent resistance across is …

Question 102

Networks, Signals and Systems
Driving Point and Transfer Functions

Appeared in Year: 2016

Question

Numeric Answer▾

The z-parameter matrix for the two-port network shown is

Where the entries are in Suppose .

The Value of R_b (In Ω) Equals

Then the value of equals …

Question 103

Networks, Signals and Systems
Time Domain Analysis of Simple Linear Circuits

Appeared in Year: 2015

Question

Numeric Answer▾

In the circuits shown the average value of the voltage (in volts) in steady state condition is …

Average Value of the Voltage

Question 104

Networks, Signals and Systems
Nodal and Mesh Analysis

Appeared in Year: 2015

Question

Numeric Answer▾

In the circuit shown, the voltage is …

The Circuit Shown, the Voltage

Question 105

Networks, Signals and Systems
Steady State Sinusoidal Analysis Using Phasors

Appeared in Year: 2016

Question

Numeric Answer▾

The figure shows an RLC circuit with a sinusoidal current source.

RLC Circuit with a Sinusoidal Current Source

At resonance, the ratio , i.e.. , the ratio of the magnitudes of the inductor current phasor and the resistor current phasor, is …

Developed by: