Control Systems [GATE (Graduate Aptitude Test in Engineering) Electronics]: Questions 4 - 7 of 81

Access detailed explanations (illustrated with images and videos) to 1176 questions. Access all new questions- tracking exam pattern and syllabus. View the complete topic-wise distribution of questions. Unlimited Access, Unlimited Time, on Unlimited Devices!

View Sample Explanation or View Features.

Rs. 450.00 -OR-

How to register? Already Subscribed?

Passage

Sensitivity considerations often are important in the design of Control Systems. Because all physical elements have properties that change with environment and age, we cannot always consider the parameters of the Control System to be completely stationary over the entire operating life of system. For instance, the winding resistance of an electric motor changes as the temperature of the motor rises during the operation. Control System with electric components may not operate normally when first turned on because of the still-changing system during warm-up. This phenomenon is sometimes called “morning sickness” . Most duplicating machines have a warm-up period during which time operation is blocked out when first turned on.

(July)

Question 4 (1 of 5 Based on Passage)

Control Systems

Appeared in Year: 2018 (UGC-NET)

Question

MCQ▾

For an open-loop control system, sensitivity of overall transfer function M (s) with respect to forward path transfer function G (s) will be: (July)

Choices

Choice (4)Response

a.

b.

c.

d.

Question 5 (2 of 5 Based on Passage)

Appeared in Year: 2018 (UGC-NET)

Question

MCQ▾

A good control should be: (July)

Choices

Choice (4)Response

a.

Insensitive to parameter variations

b.

Very sensitive to parameter variations

c.

Sensitive to input commands.

d.

Insensitive to input commands

Question 6 (3 of 5 Based on Passage)

Control Systems

Appeared in Year: 2018 (UGC-NET)

Question

MCQ▾

Which of the following statements is correct?

Choices

Choice (4)Response

a.

A feedback can increase or decrease the sensitivity of a system.

b.

A feedback can only decrease the sensitivity of the system.

c.

A feedback can only increase the sensitivity of the system.

d.

A feedback never affects the sensitivity of a system.

Question 7 (4 of 5 Based on Passage)

Appeared in Year: 2018 (UGC-NET)

Question

MCQ▾

The sensitivity of the overall (closed-loop) transfer function for the system shown below, with respect to forward path transfer function at will be: (July)

The Overall (Closed-Loop) Transfer Function

Choices

Choice (4)Response

a.

0.398

b.

c.

0.583

d.

Developed by: