Analog and Digital Electronics-Simple Diode Circuits [GATE (Graduate Aptitude Test in Engineering) Electrical Engineering (EE)]: Questions 1 - 4 of 12
Choose Programs:
🎯 305 Numeric, 541 MCQs (& PYQs) with Full Explanations (2024-2025 Exam)
Rs. 400.00 -OR-
3 Year Validity (Multiple Devices)
CoverageDetailsSample Explanation
Help me Choose & Register (Watch Video) Already Subscribed?
Question 1
Appeared in Year: 2013
Question MCQ▾
In the circuit shown below, the knee current of the ideal Zener diode is 10 mA. To maintain 5 V across , the minimum value of in and the minimum power rating of the Zener diode in mW respectively are
Choices
Choice (4) | Response | |
---|---|---|
a. | 125 and 125 | |
b. | 250 and 125 | |
c. | 250 and 250 | |
d. | 125 and 250 |
Question 2
Appeared in Year: 2012
Question MCQ▾
In the circuit shown, an ideal switch S is operated at 100 kHz with a duty ratio of 50% . Given that is 1.6 A peak-to-peak and is 5 A dc, the peak current in S is
Choices
Choice (4) | Response | |
---|---|---|
a. | 5.0 A | |
b. | 6.6 A | |
c. | 5.8 A | |
d. | 4.2 A |
Question 3
Appeared in Year: 2013
Question MCQ▾
The input impedance of the permanent magnet moving coil (PMMC) voltmeter is infinite. Assuming that the diode shown in the figure below is ideal, the reading of the voltmeter in Volts is
Choices
Choice (4) | Response | |
---|---|---|
a. | 2.23 | |
b. | 4.46 | |
c. | 3.15 | |
d. | 0 |
Question 4
Appeared in Year: 2021
Question Numeric Answer▾
The waveform shown in solid line is obtained by clipping a full-wave rectified sinusoid (shown dashed) . The ratio of the RMS value of the full-wave rectified waveform to the RMS value of the clipped waveform is ________. (Round off to 2 decimal places.)
Edit